LR stock price Philippines

Win7 system PE reinstall,LR stock price Philippines teach you how to do it easily. Over time, the service life of the computer is getting shorter and shorter. The performance of hardware equipment is constantly updated, and the old operating system is gradually eliminated. If your computer has been used for several years, you may need to reinstall its system to improve its performance and stability. This article will introduce how to use Win7 system PE reinstall to easily solve this problem.I. First of all, you need to make the PE boot disk of Win7. PE is a Windows-based system recovery environment that can maintain and repair the system without starting the operating system. The way to make a PE boot disk is to download the Win7PE file first, and then use the tool to make a PE boot disk. Here we take the USB flash drive as an example to introduce it. Step 1: Download the Win7PE file and unzip it to the computer. Step 2: Download WinToFlash, the tool for making PE boot disk, and install it. Step 3: Insert the USB flash drive into the computer, run the WinToFlash software, and select the Win7PE file you want to make. Step 4: Select the USB flash drive as the boot disk and start production. The above are all the steps of the preparation. If your computer is damaged, you can use another computer to make it.After the production is completed, insert the USB flash drive into the computer that needs to reinstall the system, enter the BIOS settings, and select the USB flash drive to start in the boot options. II. After the system reinstalls the PE startup, you can choose to restore the system or reinstall the operating system. Here we take reinstalling the system as an example to introduce. Step 1: Select the "Start" menu and open "Computer", "PE Toolbox" and "Windows Installer" in turn. Step 2: On the main interface of the Windows installer, select "Install Windows" and click "Next". Step 3: On the next interface, select "Use Recommended Settings" and continue. Step 4: On the next interface, select "Accept" and continue. Step 5: Select the type of installation (regular or custom) and continue. Step 6: Select the installation location (the partition where the system is located) and continue.Step 7: During the installation process, the system will automatically format and install. The above are all the steps to reinstall the system. The whole process is relatively simple, and you just need to follow the prompts of the interface. III. After the system driver installation and reinstalling the system, the system driver needs to be installed. System drivers refer to the programs required by computer hardware devices, such as graphics card drivers, sound card drivers, network card drivers, etc. Installing these drivers can make the hardware device work normally and improve the performance and stability of the system. Step 1: Open the device manager and check the hardware name and model of the device. Step 2: Download the corresponding driver and unzip it to the specified folder. Step 3: Enter the corresponding hardware device in the device manager and select "Update Driver". Step 4: Select "Install Driver from Computer" and browse to the folder where the driver is located.Step 5: Install the driver and complete the installation under the interface prompt. The above are all the steps of system driver installation. The installation of drivers needs to be selected and installed according to different hardware devices. If you are not sure, you can check the model of the hardware device. In summary, by using Win7 system PE reinstallation, the problem of system reinstallation can be easily solved. The reinstallation process is very simple. You just need to follow the prompts. It is worth noting that reinstalling the system will empty the data in the hard disk, and you need to do a good backup. At the same time, installing the driver is also an issue that needs attention after reinstalling. You can refer to the steps provided in this article.

Contact Us
Phone：020-83484696