Bingo Plus

List of contents of this article:

• 1, Manual transmission car shift
• 2、Bingo Plus' title='What's the name of the pole used to shift gears in the car?' > What's the name of the pole used to shift gears in the car?
• 3、How to repair the manual gear lever if it falls off

Manual transmission car shift

Manual transmission changes gears at the right time according to the speed of the car.Under normal circumstances,Bingo Plus start the first gear, and when you drive a few meters, then change to the second gear; when the speed reaches more than 20 miles and 35 miles, change to the third gear; when the speed reaches more than 35 miles, change to the fourth gear of 45 miles; when the speed reaches more than 45 miles, change to the fifth gear.

Change gears at the right time according to the speed of the car. Under normal circumstances, the start is one gear, and when you drive a few meters, you can change to the second gear; when the speed reaches more than 20 miles and 35 miles, you can change the third gear; when the speed reaches more than 35 miles, change to the fourth gear at 45 miles; when the speed reaches more than 45 miles, change to the fifth gear.

Geal → 2nd gear: Hold the gear lever and pull it down into the 2nd gear 2nd gear → 3rd gear: Push the gear lever up into the 3rd gear by hand. 3rd gear → 4th gear: gently hold the lever with the palm of your hand, grab the lever separately with your fingers, and pull down into the 4th gear, the palm still wraps the lever.4th gear → 5th gear: push the lever outward with your backhand, and then push up into 5th gear.

The manual transmission car shifting skill is to master the timing of the gear shift. When the engine speed is about 2000 rpm, first reduce the throttle and then step on the clutch, and then change gears.

Change gears quickly. The key point of gear shifting is to be fast, and the fastest speed is to step on the clutch, shift gears and step on the accelerator. Starting gear control. Don't believe the rumor that the second gear is faster and more stable. The starting gear should be in the first gear. As long as the vehicle is from standstill to start, the gear should be kept in the first gear.

What's the name of the pole used to shift gears in the car?

1. The transmission lever is called the transmission lever or joystick, which is an important part used in automobile transmission.Its main purpose is to help the car shift gears, and the shift lever is usually divided into 1/2 gear shift lever, 3/4 gear shift lever, 5 gear shift lever, etc. Whether it is automatic gear or manual gear, there is basically a variable lever.

2. The gearshift lever is called the gearshift lever or the operation lever, which is used on the gearbox of the car. The main purpose of the shift lever is to help the car shift gears; the shift lever is a lever, which can be divided into 1/2 gear shift lever, 3/4 gear shift lever, and five-speed shift lever.

3. It is called a shift lever or an operating lever, which is installed on the gearbox of a motor vehicle. It changes the gear of the motor vehicle through the gear lever or lever, so that the motor vehicle can run normally. It is a very important part of the car.

4. The lever that changes gears is called the shift lever or joystick.In the automotive field, the scientific name of the right-hand shift lever is shift lever or joystick, both of which are applicable. Its main function is to be used in the car transmission to support the gear shift operation of the car. Take the shift lever of manual transmission as an example.

How to repair the manual gear lever

1. Park on the roadside first to check the gear club ballWhether the head link falls off or not, if it falls off, you can tie it with a rope over the wire. If not, call a nearby repair shop. If you have a long driving experience, you can continue to run, and just step on the clutch when igniting.

2. Accident repair: When a gear is found to be out of gear, still push the transmission lever into the gear, and then remove the transmission cover to check the gear meshing. If the gear meshes well, the fault is in the gearshift mechanism. Test the positioning device of the gearshift fork that pushes the jump gear by hand. If the positioning is poor, you need to remove the shift fork shaft and check the positioning ball and spring.

3. The solution to the gear loss of the car is: check whether the shift lever positioning pin is worn loose, broken or lost; check whether the variable speed fork shaft interlock device is worn and failed; check whether the synchronizer lock pin is loose or scattered.

4. Automatic transmission car, our gear lever has fallen off. We must open the panel to analyze the problem carefully. If necessary, we should ask the repairman. I hope your car is getting better and better.

5. If the gear lever falls off and the gear shift head falls off, it can be installed. If the stick inside comes out together, it can only be repaired at the repair shop. Manual gear, forward gear 5, reverse gear, idle gear. Generally speaking, it is idle when parking.