Casino Plus

List of contents of this article:

• 1、How to reinstall the computer system
• 2,Casino Plus Reinstall the system only reinstall the c disk
• 3, How to reinstall the C disk?

How to reinstall the computer system

1. Set the computer optical drive startup and set the computer to optical drive startup (when starting the computer, press the DEL key or (laptop) continuously press F2 to enter CMOS Set and press F10 to save).

2. There are mainly the following ways to reinstall the computer system: use the built-in recovery function of the operating system, use the system installation disk to reinstall, and reinstall the system through third-party software. First of all, it is a relatively simple way to reinstall using the built-in recovery function of the operating system.

3. This article will introduce the steps to reinstall the computer system to help readers better understand the process. Put the system CD into the optical drive, and restart the computer!Enter the BIOS settings. Press the delete key before the system starts to enter the BIOS settings.

4. The operating system is a necessary operating environment for the computer. If you encounter a system failure, you need to reinstall the system. Many people still don't know how to reinstall the system on the computer. In fact, there are many ways to reinstall the system. Commonly used are USB disk reinstallation and hard disk reinstallation. Here, take the hard disk reinstallation of the win7 system as an example. I will introduce the operation steps of how to reinstall the system on the computer.

5. The computer uses CD-ROM to reinstall the system. The operation steps are as follows: prepare the system CD-ROM. Prepare the system CD-ROM: If not, you can buy it in the computer store.

6. These will disappear after the system is formatted and installed. Prepare a system disk (USB disk system boot disk is also acceptable), and pay attention that it must be usable.Download the driver, download, and back up your driver. It's best to download it from the official website.

Reinstall the system only reinstall the c disk

The premise of reinstalling the system is to install the C disk, of course its The things on his disk are still there. If the whole disk is formatted to install the system, there will be nothing left on the other disks.Necessary notes for system reinstallation: 1. Basic common sense of system reinstallation.

Only. Reinstalling the system is to format the system disk, and the C disk represents the system disk. Therefore, when reinstalling the system, it will only empty the C disk and will not clear the data of other disk disk symbols.

Reinstalling the system does not only empty the C disk, it can completely empty all the hard disks. When we install the system, a partition interface will appear. At this time, we can choose to empty and reinstall the hard disk of the system. Therefore, if we don't want to empty all the hard disks, we need to carefully select the partition operation.

Reinstalling the C disk is actually reinstalling the system. The reinstall system is only carried out on the C disk, and other disks will not be affected. Tell you a simple way to reinstall the system.Method: Go to the software store in the computer store and buy a clone CD of winxp sp3. You will know when you tell the salesperson that it's better to buy the latest version.

How to reinstall the C disk?

1. Preparation: Before installing the C disk, we first need to prepare the installation disk, operating system disc or USB disk, and driver disc and other devices. Enter the BIOS settings: When the computer is turned on, press the DEL or F2 key to enter the BIOS setting interface. Set the boot mode to CD-ROM or USB flash drive inside, and then save the changes and exit.

2. Download the tool of "Lao Maotao WinPE" to the hard disk on the Internet, then connect the USB flash drive to the computer, and follow the steps below to make a bootable USB flash drive.Double-click the "Lao Maotao WinPE" folder, double-click the SETUP folder, select PESETUP.EXE to decompress, and open the "WinPE special tool installation interface made by Lao Maotao.

3. After entering the system installation interface, follow the prompts to install. It should be noted that when selecting the installation location, select the partition where the previous C disk is located to format and reinstall the system. This step needs to be carefully operated to avoid accidentally deleting important partitions.

4. If the computer C disk is damaged and reinstalled, the system can be installed on other disks. Take the installation of the window7 system as an example: before installing the system, pay attention to placing some files on the computer desktop to other disk symbols other than the C disk. Since the win7 system is installed, you need to prepare a .gho system file and a hard disk installer.As shown in the picture.

5. It will also be skipped during detection. If the system is damaged, you can't enter and reinstall the system. Method: Pull out or put the USB flash drive or CD-ROM with the leading system into the computer. After turning on the computer, press F12 and select the USB flash drive or CD-ROM leader. Find the installation system to the C disk on the leader interface of the CD-ROM or USB flash drive and select the installation system to the C disk.