European Cup live

List of contents of this article:

• 1, What's the problem if the light in the light control system of the billiard room doesn't turn on?
• 2、How is the light in the billiard hall controlled
• 3, The function of the billiard light controller test button
• 4, Billiards Light Control SystemUnify
• 5, Billiard room software management system and lighting control system

What's the problem if the light in the light control system of the billiard room doesn't turn on?

1. If it appears, there may be a problem with the controller. If it doesn't appear, it's a software problem. Specifically, you should contact all the billing system manufacturers to solve it for you.

2. The electric light is broken, but it is unlikely. Even if it is broken, it can't all be broken. If the switch is broken again, it is most likely that it can only be replaced.

3. The reason for the billing system setting. As long as the light is turned on, no one will turn off the button on the billing system. Even if there is a power outage, the power of the billing system will be turned off, and the time will still pass. It can be set. As long as the light goes out, the time will not go away.

How to control the lights of the billiard hall

1. Use interface board to control: use a 1014-PhidgetInterfac eKit0/0/4 interface board (or similar device), connect to the USB interface of the computer, and use the corresponding software to control the switch of the light. Use smart lights and smart switches: Smart lights have the function of automatically adjusting the brightness and automatically adjusting the light according to the ambient brightness.

2. One common fire line contact and 16 light line contact points. 1 common fire line contact and 16 light line contact points will control the open table lamp. You only need to control the public fire line from the distribution box.On the common fire wire junction pole of the rear panel of the instrument, the light wire can be connected to the back panel of the controller in turn.

3. The lighting control of the billiard hall is controlled by a computer. There is a special system, which must be used by professionals to line the wires, and then the system can be installed.

4. The light control of the billiard hall is controlled by a computer. There is a special system. The billiard hall management system can control the automatic switching lights and automatic billing. If the customer needs to pause, just find the customer's table number on the computer of the billiard hall management system and press pause.

5. The first brand of billiards billing system, Yitong billiard billing system, is the unanimous choice of more than 2,000 users across the country.

6. The setting steps are as follows: Enter the management interface of the billiard hall, which can be found in the main menu or setting options of the system.Find and select the "Billiard Table Management" menu on the management interface, which will show a list of all billiard tables.

The function of the billiard light controller test button

The function of the driver console panel light test button is that the control panel can set and manage the device. The control panel is a part of the Windows graphical user interface, which can be accessed through the start menu.

Controlled by the lighting controller system. When the pool table is opened, the "on" operation command is sent to the light controller through the light controller system. After the light controller receives the "on" command, the corresponding switch responds and the light turns on.

Test the emergency function. Testing the emergency function of emergency lightsWhen possible, press the test button for a long time for 3 seconds, and the emergency light can also enter the emergency function when plugged in, and press it again to return to the original state. The main function of the test button is to test the emergency function.

The Shimano transformer controller button is used to control the Shimano transformer system. The control button is an instruction element in the electrical control system. Its main function is to issue control signals to control the operation or stop of the electrical system.

But you have to know whether there are the following functions: you must have a good lighting controller management software. The lighting controller must be able to cascade (generally, computers have only one COM port. If the number of billiard tables exceeds 16, it needs to be cascading.) The light controller must have a safety tube.

In addition, the lamp controller can also realize the switch function of LED street lights.By controlling the switch signal, the lamp controller can control the switch status of the LED street lamp and realize the switch control of the light. This can conveniently control the use of LED street lamps, save energy and extend the service life of LED lamps.

Billiard light control system

1. Then select the installation position. The main controller should be placed in a ventilated and dry place away from moisture and direct sunlight, and the sub-controller should be fixed in a suitable position by placing screws horizontally. Then wire, connect the power cord of the main controller and the sub-controller, and connect the signal line to the switch of the billiard light control system.

2. Operate through the lighting controller system. When the pool table is opened, send "Open" to the light controller through the light controller system."Operation command, after the light controller receives the "on" command, the corresponding switch responds, and the light turns on.

3. Use the interface board to control: use a 1014-PhidgetInterfaceKit0/0/4 interface board (or similar device), connect it to the USB interface of the computer, and use the corresponding software to control the switch of the light. Use smart lights and smart switches: Smart lights have the function of automatically adjusting the brightness and automatically adjusting the light according to the ambient brightness.

4. There are many billiard light control systems on the market now. But you have to know whether there are the following functions: there must be good lighting controller management software. The lighting controller must be able to cascade (generally, computers have only one COM port. If the number of billiard tables exceeds 16, it needs to be cascading.

Biard room software management system and lighting control system

It is controlled by the lighting controller system. When the pool table is opened, the "on" operation command is sent to the light controller through the light controller system. After the light controller receives the "on" command, the corresponding switch responds and the light turns on.

The cashier administrator has clear authority, two operation interfaces, and the cashier only needs to follow the permissions given by the boss and his own daily operation. Even the login and cancellation system will form a report to facilitate the boss to understand the various business situations.

Use the interface board to control: use a 1014-PhidgetInterfaceKit0/0/4 interface board (or classSimilar devices), connect to the USB interface of the computer, and use the corresponding software to control the switch of the light. Use smart lights and smart switches: Smart lights have the function of automatically adjusting the brightness and automatically adjusting the light according to the ambient brightness.